Bike Maintenance Guide

Bike Maintenance is a broad issue, and so in this post we begin with the fundamentals: a pre-ride check as well as securing bolts and cleaning and lubricating important components. Don’t forget to schedule the regular maintenance of the mechanic for your bike.  If you are looking for an Efficient Bike Repair Auckland then log on to Bespoke Cycles.

If you are a regular cyclist make sure you bring your bike in for yearly tune-ups. This will ensure that the more difficult to evaluate components such as spokes derailleurs, bearing surfaces and cables are checked and maintained regularly for Bike Maintenance . The bike’s components should always be adjusted and serviced by skilled mechanics.

Inspecting Your Bike

The best protection against loose parts is to conduct a regular check before each ride for regular Bike Maintenance . This will allow you to spot possible issues before they turn into safety risks. A majority of pre-ride safety adjustments can be done using a bicycle multitool.

The ABC’s: Air, Brakes, Chain

Before you ride, be certain to read for “ABC’s” to make your riding safer and make the bike to last for longer.

A stands for Air

A properly inflated tire can help to prevent flats. Look at the sidewalls of your tires for the recommended pressure of your tire. While you’re checking your tire’s air pressure make sure to make sure that your quick-release levers and through axles (if they’re present) are tightened properly too. When you’re ready to go out, be sure to carry your repair kit as well as pump on hand.

B stands for Brakes

Press your rear and front brake levers to ensure that your brakes are engaged in a smooth and efficient manner.

C stands for Chain

Take a look at your chain, including all gears. Lubricating your chain and keeping all surfaces clean will ensure that the bike shifts more smoothly and your drivetrain (made from the chains on the front, the rear derailleur, cassette and chain) will last longer.

Securing Bike Bolts

Bicycles are anchored with a variety of bolts and nuts. The maintenance of an “tight ship” is important since loose (or inadequately tightened) components of bikes can result in significant wear and tear that can make them less efficient and can create dangers to safety. When tightening bike bolts check the manual of your bike’s owner for appropriate torque specifications. The over-tightening of the bolts can cause damage or even failure.

Regular maintenance (monthly weekly, or more frequently depending on the type of riding you do) is crucial. If you spend much time in wet or and muddy conditions, or you race hard, fast and often, it is important to wash your bike more often.

Making sure your bike’s parts are properly lubricated and cleaned is essential for a smooth performance. Lubrication helps protect moving parts from wear and tear caused by friction. It stops it from “freezing up,” and keeps corrosion and rust at the horizon.

Basic Supplies

These items are essential to most cleaning and lubrication tasks:

Clean rags

Have an abundance of these in your bag for oil, grease and wax-related jobs as well as to dry and clean general.


There are a variety of shapes and sizes to reach into difficult-to-reach areas to get rid of the dirt that washing alone won’t remove. Old toothbrushes are excellent.


If used with care it can be a useful tool, but be cautious in this. Water, particularly when it comes from a hose with high pressure, could cause damage to delicate bearings throughout your bike. Soap or general cleaner Use dishwashing soap that is diluted or a pre-formulated bike wash cleaner to clean your frame.


A specific degreaser for bikes (avoid the use of turpentine or kerosene) can clean the gummy components of the chain of your bike. Choose a solvent which is safe for environmental factors (and the environment). Make sure that you dispose of solvents in a safe manner.

Lubrication of your chain

Properly cleaning your chain can prolong the life that your motor will last. Make sure to apply bicycle-specific lube oil to clean chains.

There are two kinds of lubes, wet and dry. Wet lube is recommended to use when driving in rainy conditions. It sticks strongly to the drivetrain, and is less likely to wash off in the rain. But dirt and grit may adhere on it. Therefore, make certain to wash off the excess grease. Dry lube is a great choice in dry environments. Dirt and grit adhere less with dry lube however, it is still able to wash off very easily if you riding in the rain.

A bike stand allows you to put your bike at an appropriate height while performing work. It will also permit you to pedal or take the wheels off to allow you to wash all the parts that move and are difficult to reach.

What to Clean and How

The majority of bike components that are dirty are cleaned simply by wiping them clean using the help of a damp (or dry) cloth. Other components require frequent cleaning, scrubbing and lubrication. The drivetrain (front chain rings front chain rings, rear cassettes derailleur, chain and rear) is deserving of the greatest care, so take a look at our video to get some helpful tips.

Leave a Reply

Your email address will not be published.